Installation Guide
All our mounts are equipped with 3M VHB™ 4991F double-sided tape, ensuring a reliable and long-lasting adhesion. We recommend following our detailed guide for a correct installation.
Step 1
Before proceeding with the installation, check the placement of the mount by positioning it on the chin guard of your helmet, without removing the protective film. Use the product photos on our website as a reference.
⚠️ Different sizes of the same helmet may result in some variations in position compared to the photos.
✅ Make sure that the chosen position allows the perfect adaptation of the 3M VHB adhesive.
⚠️ Different sizes of the same helmet may result in some variations in position compared to the photos.
✅ Make sure that the chosen position allows the perfect adaptation of the 3M VHB adhesive.
Step 2
Carefully clean the surface of the helmet chosen for the mount. Use the alcohol wipe included in the packaging.
⚠️ Dirt residues could compromise the adhesion of the mount to the helmet.
✅ Make sure to remove all traces of dirt.
⚠️ Dirt residues could compromise the adhesion of the mount to the helmet.
✅ Make sure to remove all traces of dirt.
Step 3
Remove the protective film from the 3M VHB adhesive. Heat the surface of the adhesive with a heat gun or, alternatively, a hairdryer.
⚠️ Applying the adhesive while cold does not guarantee its perfect adaptation to the surface of the helmet.
✅ Heat the adhesive surface moderately to obtain an optimal fit with the chin guard of the helmet.
⚠️ Applying the adhesive while cold does not guarantee its perfect adaptation to the surface of the helmet.
✅ Heat the adhesive surface moderately to obtain an optimal fit with the chin guard of the helmet.
Step 4
Place the mount in the position chosen during Step 1. Once satisfied with the positioning, press firmly against the chin guard of the helmet for 3 minutes.
⚠️ Once pressure has been applied, it will no longer be possible to reposition the support.
✅ Place the support lightly and, once satisfied with the position, apply pressure for 3 minutes.
⚠️ Once pressure has been applied, it will no longer be possible to reposition the support.
✅ Place the support lightly and, once satisfied with the position, apply pressure for 3 minutes.
Step 5
Wait at least 48 hours before using the mount.
⚠️ Using the mount before the 48h period could compromise its adhesion to the helmet.
✅ Allow the adhesive to complete the setting time.
⚠️ Using the mount before the 48h period could compromise its adhesion to the helmet.
✅ Allow the adhesive to complete the setting time.
